- 本站编辑：亿鼎博电竞发布日期：2019-12-07 07:24 浏览次数：
The installation and safety of large ceiling fans is more important. Relevant sources say that such fans operate relatively fast and often require 24-hour uninterrupted work. Even many ceiling fans work in workshops with relatively high temperatures Continuous operation is easy to cause aging, so the operation safety of ceiling fans is very important, then how to ensure the safe operation of large ceiling fans? 1. Large ceiling fans with good sales volume of regular dust removal need to remove dust after using for a period of time, which can avoid accumulating a certain amount of dust, and industrial fans need to ensure that their blades are clean, otherwise the use effect of industrial fans will be directly affected Even affect the service life of the equipment. When cleaning the ordinary ceiling fan, the fan will be removed directly, the parts will be cleaned one by one, usually industrial big fan can also use this method, but because the large ceiling fan is difficult to take down, so to make sure that can be fully assembled. Fan Blades and hanging devices can be cleaned with water, after washing to ensure dry to prevent rust, motor parts such as water, recommended to use Compressed air to clean electronic parts. 1. The installation of large ceiling fans must take into account the structure of the plant. On the other hand, according to the weight of large energy-saving fans, the roof of the plant must have a certain load capacity On the other hand, the air circulation caused by the structure of the factory should be taken into account. The weight of a large energy-saving fan is large, and when the large energy-saving fan of this kind of weight rotates, it will also bring certain strength So the roof structure of the factory needs a high load capacity to ensure the normal installation and safe use of large energy-saving fans. 2. This involves not only architecture but also aerodynamics, where the high volume of air generated by large ceiling fans is based on the flow of air, and if the factory structure is not sufficiently ventilated, the volume of air collected by the large and reasonably priced ceiling fans will be substantially reduced If the structure of the plant is too open, the air stirring effect of the large energy saving fan will be greatly weakened, so the setting position of the large energy saving fan should be strictly controlled to ensure the ventilation and cooling effect will be greatly increased.